CAMBRIDGE QT Guide d'installation télécharger pdf (Page 15)

page 15

System Conguration

After the QtPro is mounted, the power can be turned on and settings

modied to test wiring to the connected emitters. After testing,

it is time to congure the controller for operations. There are two

methods for performing conguration:

1. The front panel display can be used for basic conguration set-

tings to get the system working and tested. In many cases, basic

settings are all that a user needs. This interface only supports a

subset of the functionality.

2. The MCS (Monitor Control Software) interface allows for cong-

uring all the available functionality. The MCS can be used with

any internet browser that can connect to the Qt 300/600 over a

LAN connection. See System Control Using MCS on page 22 for

details.

System Congurable Feature List (Front Panel / MCS)

The following is a complete list of the Qt 300/600 features and if they

can be congured through the front panel, MCS or both.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 39 40

Pas de commentaire

CAMBRIDGE QT Guide d'installation Page 15